640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

超稳Y沸石制备技术对沸石铝分布的影响 Ⅱ.均匀铝分布的超稳Y沸石的制备

对水热处理后得到的USY沸石作进一步的酸处理以及采用改进的氟硅酸盐溶液骨架富硅工艺,分别得到了经XPS剖面分析证实为铝分布均匀的超稳Y沸石HAY-Ⅰ和HAY-Ⅱ。IR分析表明,在酸处理过程中从USY沸石中去掉的那部分非骨架铝类与3690cm~(-1)处羟基有关,仍残留在HAY-Ⅰ沸石中的那部分非骨架铝类与3670cm~(-1)和3600cm~(-1)处羟基有关。XRD和化学分析表明HAY-Ⅰ沸石仍含有约50％的非骨架铝类,而HAY-Ⅱ沸石则基本上不含非骨架铝类,HAY-Ⅱ沸石还显示更高的结晶保留度。DTA分析表明,HAY-Ⅰ和HAY-Ⅱ两种沸石的热稳定性均高于USY沸石。     

Multibody dynamics of aircraft occupants seated behind interior walls

To improve aircraft crash safety, conditions critical to occupants survival during a crash must be known. In view of the importance of this problem, studies of post-crash dynamic behavior of victims are necessary in order to reduce severe injuries. In this study, crash dynamics program SOM-LA/TA, incorporating a dynamic model of the human body with a finite element model of the seat structure was used. Modifications were performed in the program for reconstruction of an occupant's head impact with the interior walls or bulkhead. A viscoelastic-type contact force model was used to represent the compliance characteristics of the bulkhead. Correlated studies of analytical simulations with impact sled test results were accomplished. A parametric study of the coefficients in the contact force model was then performed in order to obtain the correlations between the coefficients and the Head Injury Criteria. A measure of optimal values for the bulkhead compliance and displacement requirements was thus achieved in order to keep the possibility of a head injury as little as possible. This information could in turn be used in the selection of suitable materials for the bulkhead, instrument panel, or interior walls of an aircraft.     

On a model of electromagnetic field propagation in ferroelectric media

The Maxwell system in an anisotropic, inhomogeneous medium with non-linear memory effect produced by a Maxwell type system for the polarization is investigated under low regularity assumptions on data and domain. The particular form of memory in the system is motivated by a model for electromagnetic wave propagation in ferromagnetic materials suggested by Greenberg, MacCamy and Coffman [J.M. Greenberg, R.C. MacCamy, C.V. Coffman, On the long-time behavior of ferroelectric systems, Phys. D 134 (1999) 362-383]. To avoid unnecessary regularity requirements the problem is approached as a system of space-time operator equation in the framework of extrapolation spaces (Sobolev lattices), a theoretical framework developed in [R. Picard, Evolution equations as space-time operator equations, Math. Anal. Appl. 173 (2) (1993) 436-458; R. Picard, Evolution equations as operator equations in lattices of Hilbert spaces, Glasnik Mat. 35 (2000) 111-136]. A solution theory for a large class of ferromagnetic materials confined to an arbitrary open set (with suitably generalized boundary conditions) is obtained.     

Nanometric Antimony Powder Synthesis by Activated Alkaline Hydride Reduction of Antimony Pentachloride

A novel chemical reduction method using an activated alkaline hydride (LiH or NaH-t-BuONa) in tetrahydrofuran solvent has been applied to antimony salt reduction. X-ray diffraction and transmission electron microscopy studies have been carried out to characterize the morphology and structure of the materials. Alkali hydride nature influence has been proved. In both cases the process allows to prepare antimony particles in nanometer range from few nanometers to about 20nm which could be used as anodic materials for lithium–ion batteries. With lithium hydride well-crystallized particles inclined to agglomeration were observed whereas finely dispersed amorphous particles were pointing out after activated sodium hydride reduction.     

On parametric instability of viscous two-layer fluid in a vessel with a permeable bottom

A linear problem of parametric oscillations of a low-viscous two-layer fluid in a closed vessel partially filled with a porous medium is studied. An asymptotic solution is constructed on the basis of combined application of boundary functions and averaging methods. Approximate formulas for boundaries of instability domains in the case of subharmonic and harmonic resonances are derived.     

On acoustic and electric waves diffraction in piezoelectric medium by a permeable half-plane crack

The problem of electric and acoustic waves diffraction by a half-plane crack in a transversal isotropic piezoelectric medium is investigated. The crack is assumed to be electric permeable and free of tractions. The so-called “quasi-hyperbolic approximation” [15] is adopted. Applying Laplace transformations and Wiener–Hopf technique a closed form solution is obtained. By the means of Cagniard–de Hoop method a detailed dynamic full electroacoustic wavefield’s investigation is conducted. Mode conversion between electric and acoustic waves, effect of electroacoustic head wave, Bleustein–Gulyaev surface wave and the wavefield structure depending on the type of the incident wave (acoustic or electric) and its angle of incidence are analyzed in details. The dynamic field intensity factors at the crack tip depending on the angle of incidence and on time are derived explicitly. Numerical analysis is presented.     

La掺杂浓度对PLZT薄膜红外光学性质的影响

采用溶胶-凝胶法在Pt/Ti/SiO2/Si衬底上制备了不同La掺杂浓度PLZT(x/40/60)薄膜- x射线衍射分析表明制备的PLZT(x/40/60)薄膜是具有单一钙钛矿结构的多晶薄膜- 通过红外椭圆偏振光谱仪测量了波长为2-5—12-6μm范围内PLZT薄膜的椭偏光谱，采用经典色 散模型拟合获得PLZT薄膜的红外光学常数，同时也拟合获得PLZT薄膜的厚度- 随着La掺杂浓 度的增大，折射率逐渐减小- 而消光系数除PLZT(4/40/60)薄膜外，呈现逐渐增大的趋势- 分析表明这些差异主要与PLZ 关键词： PLZT薄膜 红外光学性质 红外椭圆偏振光谱     

High resolution staring arrays answering compact MW and LW applications

This paper overviews the electro-optical and thermal performances of different types of infrared detectors manufactured by Sofradir. The detector’s fabrication processes and detector’s performance are shortly described. New staring arrays are more compact and offer system solutions required by infrared market. Special attention is directed to some reliability advantages of new dewar design. Finally, the development trends for highest resolution infrared detector are discussed. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 59570U (2005).     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.